Navigation

The HERE SDK enables you to build a comprehensive turn-by-turn navigation experience. With this feature, your app can check the current device location against a calculated route and get navigational instructions just-in-time.

Even without having a route to follow, the HERE SDK supports a tracking mode, which provides information about the current street, the map-matched location and other supporting details such as speed limits.

Note that the HERE SDK provides no UI assets for maneuver arrows to indicate visual feedback. Instead, all information that is available along a route is given as simple data types, allowing you to choose your own assets where applicable.

A tailored navigation map view can be optionally rendered with the VisualNavigator. Once startRendering() is called, it will add a preconfigured MapMarker3D instance in form of an arrow to indicate the current direction - and incoming location updates are smoothly interpolated. In addition, the map orientation is changed to the best suitable default values.

The preconfigured MapMarker3D instance can also be customized by setting your own model - or it can be disabled. Internally, the VisualNavigator uses a LocationIndicator instance and thus you can set also a custom LocationIndicator to the VisualNavigator. When this is done, you also need to manually add, remove and update the instance. Similar, as when you already use a LocationIndicator instance on the map view, see the related map items section.

By default, the style of the LocationIndicator will be determined from the transport mode that can be set for the VisualNavigator. If a route is set, then it is taken from the route instance instead. If a custom asset is used, then the style must be switched directly via the LocationIndicator class.

Voice guidance is provided as maneuver notifications that can be fed as a String into any platform TTS (Text-To-Speech) solution.

Turn-By-Turn Navigation

The basic principle of turn-by-turn navigation is to frequently receive a location including speed and bearing values. These values are then matched to a street and compared to the desired route. A maneuver instruction is given to let you orient where you are and where you want to go next.

When leaving the route, you can be notified of the deviation in meters. This notification can help you to decide whether or not to calculate a new route. And finally, a location simulator allows you to test route navigation during the development phase.

All code snippets from the below sections are also available on GitHub as part of the Navigation example app. This app shows the code in connection and provides a testable driving experience and best practices such as keeping the screen alive during guidance. However, it does, not cover every aspect of a full-blown production-ready application. For example, the app does not show how to enable getting location updates while an app may operate in background. If you are interested in such behavior, you can check the related section in the Get Locations guide.

In addition, you can also find a NavigationQuickStart app on GitHub that shows how to start guidance with just a few lines of code. See also the next section.

Get Started

Before we look into the navigation features of the HERE SDK in greater detail, lets first see a short coding example that shows how to start guidance with speakable maneuver instructions and a guidance view:

private void startGuidance(Route route) {
    try {
        // Without a route set, this starts tracking mode.
        visualNavigator = new VisualNavigator();
    } catch (InstantiationErrorException e) {
        throw new RuntimeException("Initialization of VisualNavigator failed: " + e.error.name());
    }

    // This enables a navigation view including a rendered navigation arrow.
    visualNavigator.startRendering(mapView);

    // Hook in one of the many listeners. Here we set up a listener to get instructions on the maneuvers to take while driving.
    // For more details, please check the "Navigation" example app and the Developer's Guide.
    visualNavigator.setManeuverNotificationListener(maneuverText -> {
        Log.d("ManeuverNotifications", maneuverText);
    });

    // Set a route to follow. This leaves tracking mode.
    visualNavigator.setRoute(route);

    // VisualNavigator acts as LocationListener to receive location updates directly from a location provider.
    // Any progress along the route is a result of getting a new location fed into the VisualNavigator.
    setupLocationSource(visualNavigator, route);
}

private void setupLocationSource(LocationListener locationListener, Route route) {
    try {
        // Provides fake GPS signals based on the route geometry.
        locationSimulator = new LocationSimulator(route, new LocationSimulatorOptions());
    } catch (InstantiationErrorException e) {
        throw new RuntimeException("Initialization of LocationSimulator failed: " + e.error.name());
    }

    locationSimulator.setListener(locationListener);
    locationSimulator.start();
}

This code will start a guidance view and it will print maneuver instructions to the console until you have reached the destination defined in the provided route. Note that in this case, these maneuver instructions are meant to be spoken to a driver and they may be strings like "Turn left onto Invalidenstraße in 500 meters.". More detailed maneuver instructions are, of course, also available - they are showed in the sections below.

Note that above we are using the simulation feature of the HERE SDK to acquire location updates. Of course, you can also feed real location updates into the VisualNavigator.

The basic principles of any navigation app are:

1. Create a Route. Without a route to follow you cannot start guidance.
2. Create a VisualNavigator instance and start rendering (or create a Navigator instance if you want to render the guidance view on your own).
3. Set a Route to the VisualNavigator.
4. Fed in location updates into the VisualNavigator. Without location data, no route progress along a route can be detected. This can be simulated like shown above - or you can feed real location updates.

As a quick start, take a look at the NavigationQuickStart example app on GitHub and see how this works in action. If you read on, you can learn more about the many navigation features the HERE SDK has to offer.

Use a Navigator to Listen for Guidance Events

As briefly mentioned above, before you can start to navigate to a destination, you need two things:

• A Route to follow. The Route must be set to the Navigator or VisualNavigator instance to start navigation.
• A location source that periodically tells the Navigator or VisualNavigator instance where you are.

Unless you have already calculated a route, create one: Getting a Route instance is shown here. If you only want to start the app in tracking mode, you can skip this step.

You have two choices to start guidance. Either by using the headless Navigator - or with the help of the VisualNavigator. Both provide the same interfaces, as the Navigator offers a subset of the VisualNavigator, but the VisualNavigator provides visual rendering assistance on top - with features such as smooth interpolation between discrete Location updates.

Another requirement is to provide Location instances - as navigation is not possible without getting frequent updates on the current location. For this you can use a provider implementation that can be found on GitHub.

It is possible to feed in new locations either by implementing a platform positioning solution or by using the HERE SDK positioning feature or by setting up a location simulator.

The basic information flow is:

Location Provider => Location => VisualNavigator => Events

It is the responsibility of the developer to feed in valid locations into the VisualNavigator. For each received location, the visualNavigator will respond with appropriate events that indicate the progress along the route, including maneuvers and a possible deviation from the expected route. The resulting events depend on the accuracy and frequency of the provided location signals.

First off, create a new instance of our reference implementation to acquire locations:

herePositioningProvider = new HEREPositioningProvider();

Next, we can create a new VisualNavigator instance and set it as listener to the HEREPositioningProvider from above. Note that the VisualNavigator class conforms to the LocationListener interface that defines the onLocationUpdated() method to receive locations.

try {
    visualNavigator = new VisualNavigator();
} catch (InstantiationErrorException e) {
    throw new RuntimeException("Initialization of VisualNavigator failed: " + e.error.name());
}

// Now visualNavigator will receive locations from the HEREPositioningProvider.
herePositioningProvider.startLocating(visualNavigator, LocationAccuracy.NAVIGATION);

In addition, make sure to set the route you want to follow (unless you plan to be in tracking mode only):

visualNavigator.setRoute(route);

As a next step you may want to attach a few listeners to get notified on the route progress, on the current location, the next maneuver to take and on the route deviation:

// Notifies on the progress along the route including maneuver instructions.
visualNavigator.setRouteProgressListener(new RouteProgressListener() {
    @Override
    public void onRouteProgressUpdated(@NonNull RouteProgress routeProgress) {
        List<SectionProgress> sectionProgressList = routeProgress.sectionProgress;
        // sectionProgressList is guaranteed to be non-empty.
        SectionProgress lastSectionProgress = sectionProgressList.get(sectionProgressList.size() - 1);
        Log.d(TAG, "Distance to destination in meters: " + lastSectionProgress.remainingDistanceInMeters);
        Log.d(TAG, "Traffic delay ahead in seconds: " + lastSectionProgress.trafficDelayInSeconds);

        // Contains the progress for the next maneuver ahead and the next-next maneuvers, if any.
        List<ManeuverProgress> nextManeuverList = routeProgress.maneuverProgress;

        ManeuverProgress nextManeuverProgress = nextManeuverList.get(0);
        if (nextManeuverProgress == null) {
            Log.d(TAG, "No next maneuver available.");
            return;
        }

        int nextManeuverIndex = nextManeuverProgress.maneuverIndex;
        Maneuver nextManeuver = visualNavigator.getManeuver(nextManeuverIndex);
        if (nextManeuver == null) {
            // Should never happen as we retrieved the next maneuver progress above.
            return;
        }

        ManeuverAction action = nextManeuver.getAction();
        String roadName = getRoadName(nextManeuver);
        String logMessage = action.name() + " on " + roadName +
                " in " + nextManeuverProgress.remainingDistanceInMeters + " meters.";

        if (previousManeuverIndex != nextManeuverIndex) {
            snackbar.setText("New maneuver: " + logMessage).show();
        } else {
            // A maneuver update contains a different distance to reach the next maneuver.
            snackbar.setText("Maneuver update: " + logMessage).show();
        }

        previousManeuverIndex = nextManeuverIndex;
    }
});

// Notifies on the current map-matched location and other useful information while driving or walking.
visualNavigator.setNavigableLocationListener(new NavigableLocationListener() {
    @Override
    public void onNavigableLocationUpdated(@NonNull NavigableLocation currentNavigableLocation) {
        MapMatchedLocation mapMatchedLocation = currentNavigableLocation.mapMatchedLocation;
        if (mapMatchedLocation == null) {
            Log.d(TAG, "The currentNavigableLocation could not be map-matched. Are you off-road?");
            return;
        }

        Double speed = currentNavigableLocation.originalLocation.speedInMetersPerSecond;
        Double accuracy = currentNavigableLocation.originalLocation.speedAccuracyInMetersPerSecond;
        Log.d(TAG, "Driving speed (m/s): " + speed + "plus/minus an accuracy of: " +accuracy);
    }
});

// Notifies on a possible deviation from the route.
visualNavigator.setRouteDeviationListener(new RouteDeviationListener() {
    @Override
    public void onRouteDeviation(@NonNull RouteDeviation routeDeviation) {
        Route route = visualNavigator.getRoute();
        if (route == null) {
            // May happen in rare cases when route was set to null inbetween.
            return;
        }

        // Get current geographic coordinates.
        MapMatchedLocation currentMapMatchedLocation = routeDeviation.currentLocation.mapMatchedLocation;
        GeoCoordinates currentGeoCoordinates = currentMapMatchedLocation == null ?
                routeDeviation.currentLocation.originalLocation.coordinates : currentMapMatchedLocation.coordinates;

        // Get last geographic coordinates on route.
        GeoCoordinates lastGeoCoordinatesOnRoute;
        if (routeDeviation.lastLocationOnRoute != null) {
            MapMatchedLocation lastMapMatchedLocationOnRoute = routeDeviation.lastLocationOnRoute.mapMatchedLocation;
            lastGeoCoordinatesOnRoute = lastMapMatchedLocationOnRoute == null ?
                    routeDeviation.lastLocationOnRoute.originalLocation.coordinates : lastMapMatchedLocationOnRoute.coordinates;
        } else {
            Log.d(TAG, "User was never following the route. So, we take the start of the route instead.");
            lastGeoCoordinatesOnRoute = route.getSections().get(0).getDeparturePlace().originalCoordinates;
        }

        int distanceInMeters = (int) currentGeoCoordinates.distanceTo(lastGeoCoordinatesOnRoute);
        Log.d(TAG, "RouteDeviation in meters is " + distanceInMeters);
    }
});

Here we set a RouteProgressListener, a NavigableLocationListener and a RouteDeviationListener.

Inside the RouteProgressListener we can access detailed information on the progress per Section of the passed Route instance. A route may be split into several sections based on the number of waypoints and transport modes. Note that remainingDistanceInMeters and trafficDelayInSeconds are already accumulated per section. We check the last item of the SectionProgress list to get the overall remaining distance to the destination and the overall estimated traffic delay.

Note that the trafficDelayInSeconds is based upon the time when the Route data was calculated - therefore, the traffic delay is not refreshed during guidance. The value is only updated along the progressed sections based on the initial data. Use the DynamicRoutingEngine to periodically request optimized routes based on the current traffic situation.

Inside the RouteProgressListener we also can access the next maneuver that lies ahead of us. For this we use the maneuverIndex:

// Contains the progress for the next maneuver ahead and the next-next maneuvers, if any.
List<ManeuverProgress> nextManeuverList = routeProgress.maneuverProgress;

ManeuverProgress nextManeuverProgress = nextManeuverList.get(0);
if (nextManeuverProgress == null) {
    Log.d(TAG, "No next maneuver available.");
    return;
}

int nextManeuverIndex = nextManeuverProgress.maneuverIndex;
Maneuver nextManeuver = visualNavigator.getManeuver(nextManeuverIndex);

The maneuver information taken from visualNavigator can be used to compose a display for a driver to indicate the next action and other useful information like the distance until this action takes place. It is recommended to not use this for textual representations, unless it is meant for debug purposes as shown in the example above. Use voice guidance instead (see below).

However, it can be useful to display localized street names or numbers (such as highway numbers), that can be retrieved as follows:

private String getRoadName(Maneuver maneuver) {
    RoadTexts currentRoadTexts = maneuver.getRoadTexts();
    RoadTexts nextRoadTexts = maneuver.getNextRoadTexts();

    List<Locale> locales = Arrays.asList(new Locale("eng"));
    String currentRoadName = currentRoadTexts.names.getPreferredValueForLocales(locales);
    String currentRoadNumber = currentRoadTexts.numbers.getPreferredValueForLocales(locales);
    String nextRoadName = nextRoadTexts.names.getPreferredValueForLocales(locales);
    String nextRoadNumber = nextRoadTexts.numbers.getPreferredValueForLocales(locales);

    String roadName = nextRoadName == null ? nextRoadNumber : nextRoadName;

    // On highways, we want to show the highway number instead of a possible road name,
    // while for inner city and urban areas road names are preferred over road numbers.
    if (maneuver.getNextRoadType() == RoadType.HIGHWAY) {
        roadName = nextRoadNumber == null ? nextRoadName : nextRoadNumber;
    }

    if (maneuver.getAction() == ManeuverAction.ARRIVE) {
        // We are approaching the destination, so there's no next road.
        roadName = currentRoadName == null ? currentRoadNumber : currentRoadName;
    }

    if (roadName == null) {
        // Happens only in rare cases, when also the fallback is null.
        roadName = "unnamed road";
    }

    return roadName;
}

You can get localized texts for the road name based on a list of preferred languages. If no language is available, the default language is returned. In most cases, this will be the name of the road as shown on the local signs. You can get the default road texts also directly via currentRoadTexts.names.getDefaultValue().

As the location provided by the device's GPS sensor may be inaccurate, the VisualNavigator internally calculates a map-matched location that is given to us as part of the NavigableLocation object. For example, a street location is expected to be on a navigable path. But it can also be off-track, in case the user has left the road - or if the GPS signal is too poor to find a map-matched location.

It is recommended to use the map-matched location to give the user visual feedback. For example, to update the current map view based on the map-matched location. Only if the location could not be map-matched, such as, when the user is off-road, it may be useful to fallback to the unmatched originalLocation. Below we choose to use the rendering capabilities of the VisualNavigator to automatically update the map view.

Some roads, such as highways, do not have a road name. Instead, you can try to retrieve the road number.

If you detect a route deviation, you can decide based on distanceInMeters if you want to reroute users to their destination. Note that for route recalculation you may want to use the same route parameters. However, there is no automatic mechanism to choose the same route alternative as before - unless you provide UI or some other logic for this.

In the above example, we calculate the distance based on the coordinates contained in RouteDeviation: distanceInMeters. This indicates the straight-line distance between the expected location on the route and your actual location. If that is considered too far, you can set a newly calculated route to the VisualNavigator instance - and all further events will be based on the new route. The Navigation example app shows how to reroute after a deviation of 30 meters.

Handle Route Deviations

As we have seen in the above section, the RouteDeviation event can be used to detect when a driver leaves the original route. Note that this can happen accidentially or intentionally, for example, when a driver decides while driving to take another route to the destination - ignoring the previous made choices for a route alternaive and route options.

As shown above, you can detect the distance from the current location of the driver to the last known location on the route. Based on that distance, an application may decide whether it's time to calculate an entire new route or to guide the user back to the original route to keep the made choices for an route alternative and route options.

The HERE SDK offers several APIs to handle route deviations:

1. Recalculate the entire route with the RoutingEngine with new or updated RouteOptions to provide new route alternatives.
2. Use the returnToRoute() method to calculate a new route to reach the originally chosen route alternative. It is available for the online RoutingEngine and the OfflineRouteEngine. Note that a route calculate with the OfflineRouteEngine does no longer include traffic information.
3. Refresh the old route with routingEngine.refreshRoute() using a new starting point that must lie on the original route and optionally update the route options. Requires a RouteHandle to identify the original route.

The 1st and 3rd option are covered in the Routing section. Note that the 3rd option to refresh the original route does not provide the path from a deviated location back to the route. Therefore, it is not covered below. However, an application may choose to use it to substract the travelled portion from the route and let users reach the new starting point on their own.

Based on parameters such as the distance and location of the deviated location an application needs to decide which option to offer to a driver.

Calculate a route online or offline that returns to the original route with the RoutingEngine or the OfflineRoutingEngine. Use the returnToRoute() method when you want to keep the originally chosen route, but want to help the driver to navigate back to the route as quickly as possible.

The route calculation requires the following parameters:

• The original Route, which is available from the Navigator / VisualNavigator.
• For use with the OfflineRoutingEngine, you will also need to set the normalized fraction of the route which was already travelled along the route, which is available from the RouteDeviation event: routeDeviation.fractionTraveled. For the online RoutingEngine this parameter is ignored. The fractionTraveled parameter is based on the last known location of the driver on the route. When the user left the route, no RouteProgress will be delivered. This value is normalized to be a value between 0 (no progress) and 1 (destination reached). The part of the route that was already travelled will be ignored by the route calculation.
• The new starting Waypoint, which may be the current map matched location of the driver.

The new starting point can be retrieved from the RouteDeviation event:

// Get current geographic coordinates.
MapMatchedLocation currentMapMatchedLocation = routeDeviation.currentLocation.mapMatchedLocation;
GeoCoordinates currentGeoCoordinates = currentMapMatchedLocation == null ?
        routeDeviation.currentLocation.originalLocation.coordinates : currentMapMatchedLocation.coordinates;

// If too far away, consider to calculate a new route instead.
Waypoint newStartingPoint = new Waypoint(currentGeoCoordinates); // See RouteDeviation.

With the online RoutingEngine it can happen that a completely new route is calculated - for example, when the user can reach the destination faster than with the previously chosen route alternative. The OfflineRoutingEngine preferrably reuses the non-travelled portion of the route.

In general, the algorithm will try to find the fastest way back to the original route, but it will also respect the distance to the destination. The new route will try to preserve the shape of the original route if possible.

Stopovers that are not already travelled will not be skipped. For pass-through waypoints, there is no guarantee that the new route will take them into consideration at all.

Optionally, you can improve the route calculation by setting the heading direction of a driver:

if (currentMapMatchedLocation.bearingInDegrees != null) {
    newStartingPoint.headingInDegrees = currentMapMatchedLocation.bearingInDegrees;
}

Finally, we can calculate the new route:

routingEngine.returnToRoute(originalRoute, newStartingPoint, routeFractionTravelled, new CalculateRouteCallback() {
    @Override
    public void onRouteCalculated(@Nullable RoutingError routingError, @Nullable List<Route> list) {
        if (routingError == null) {
            Route newRoute = list.get(0);
            // ...
        } else {
            // Handle error.
        }
    }
});

As a general guideline for the online and offline usage, the returnToRoute() feature will try to reuse the already calculated portion of the originalRoute that lies ahead. Traffic data is only updated and taken into account when used with the online RoutingEngine.

The resulting new route will also use the same OptimizationMode as found in the originalRoute.

However, for best results, it is recommended to use the online RoutingEngine to get traffic-optimized routes.

Update the Map View using Visual Navigator

You can either react on the location updates yourself or use the VisualNavigator for this.

Typically, during navigation you want to:

• Follow the current location on the map.
• Show a location arrow indicating the current direction.
• Rotate the map towards the current direction.
• Add other visual assets, for example, maneuver arrows.

Each new location event results in a new NavigableLocation that holds a map-matched location calculated based on the original GPS signal that we have fed into the VisualNavigator. This map-matched location can then be consumed to update the map view.

One caveat, in most cases, getting location updates happens frequently, but nevertheless in discrete steps. This means that between each location may lie a few hundred meters. When updating the camera to the new location, this may cause a little jump.

On the other hand, when using the rendering capabilities of the VisualNavigator, you can benefit from smoothly interpolated movements: Depending on the speed of the driver, the missing coordinates between two location updates are interpolated and the target map location is automatically updated for you.

In addition, the VisualNavigator tilts the map, rotates the map towards the heading direction and shows a 3D location arrow and a LocationIndicator. All of this can be activated with one line of code:

// This enables a navigation view including a rendered navigation arrow.
visualNavigator.startRendering(mapView);

In addition, you can stop following the current location with:

visualNavigator.setCameraMode(CameraTrackingMode.DISABLED);

By default, camera tracking is enabled. And thus, the map is always centered on the current location. This can be temprorarily disabled to allow the user to pan away manually and to interact with the map during navigation or tracking. The 3D location arrow will then keep moving, but the map will not move. Once the camera tracking mode is enabled again, the map will jump to the current location and smoothly follow the location updates again.

To stop any ongoing navigation, call visualNavigator.setRoute(null). Reset the above delegates to null or simply call stop() on your location provider. More information can be found in the stop navigation section below.

For the full source code, please check the corresponding navigation example app.

Receive Waypoint Events with Visual Navigator

The VisualNavigator class provides more useful notifications. Below is an example of how to receive notifications on passed waypoints. Note that it is possible to be notified at the destination waypoint in two alternative ways: the first example below notifies when the destination is reached - and therefore navigation can be stopped. Whereas the second code snippet below shows how to get notified on all types of waypoints including the destination waypoint.

// Notifies when the destination of the route is reached.
visualNavigator.setDestinationReachedListener(new DestinationReachedListener() {
    @Override
    public void onDestinationReached() {
        String message = "Destination reached. Stopping turn-by-turn navigation.";
        Snackbar.make(mapView, message, Snackbar.LENGTH_LONG).show();
        stopNavigation();
    }
});

// Notifies when a waypoint on the route is reached.
visualNavigator.setMilestoneReachedListener(new MilestoneReachedListener() {
    @Override
    public void onMilestoneReached(@NonNull Milestone milestone) {
        if (milestone.waypointIndex != null) {
            Log.d(TAG, "A user-defined waypoint was reached, index of waypoint: " + milestone.waypointIndex);
            Log.d(TAG,"Original coordinates: " + milestone.originalCoordinates);
        } else {
            // For example, when transport mode changes due to a ferry.
            Log.d(TAG,"A system defined waypoint was reached at " + milestone.mapMatchedCoordinates);
        }
    }
});

The onMilestoneReached() method provides a Milestone instance that contains the information about the passed waypoints along the route. Note that only stopover waypoints are included. A Milestone includes an index that refers to the waypoint list set by the user when calculating the route. If it is not available, then the Milestone refers to a waypoint that was set during the route calculation - for example, when an additional stopover was included by the routing algorithm to indicate that a ferry must be taken.

Receive Speed Limit Events

By implementing the SpeedLimitListener you can receive events on the speed limits that are available along a road. These can be the speed limits as indicated on the local signs, as well as warnings on special speed situations, like for example, speed limits that are only valid for specific weather conditions.

An implementation example can be found in the Navigation example app you can find on GitHub:

// Notifies on the current speed limit valid on the current road.
visualNavigator.setSpeedLimitListener(new SpeedLimitListener() {
    @Override
    public void onSpeedLimitUpdated(@NonNull SpeedLimit speedLimit) {
        Double currentSpeedLimit = getCurrentSpeedLimit(speedLimit);

        if (currentSpeedLimit == null) {
            Log.d(TAG, "Warning: Speed limits unkown, data could not be retrieved.");
        } else if (currentSpeedLimit == 0) {
            Log.d(TAG, "No speed limits on this road! Drive as fast as you feel safe ...");
        } else {
            Log.d(TAG, "Current speed limit (m/s):" + currentSpeedLimit);
        }
    }
});

private Double getCurrentSpeedLimit(SpeedLimit speedLimit) {

    // Note that all values can be null if no data is available.

    // The regular speed limit if available. In case of unbounded speed limit, the value is zero.
    Log.d(TAG,"speedLimitInMetersPerSecond: " + speedLimit.speedLimitInMetersPerSecond);

    // A conditional school zone speed limit as indicated on the local road signs.
    Log.d(TAG,"schoolZoneSpeedLimitInMetersPerSecond: " + speedLimit.schoolZoneSpeedLimitInMetersPerSecond);

    // A conditional time-dependent speed limit as indicated on the local road signs.
    // It is in effect considering the current local time provided by the device's clock.
    Log.d(TAG,"timeDependentSpeedLimitInMetersPerSecond: " + speedLimit.timeDependentSpeedLimitInMetersPerSecond);

    // A conditional non-legal speed limit that recommends a lower speed,
    // for example, due to bad road conditions.
    Log.d(TAG,"advisorySpeedLimitInMetersPerSecond: " + speedLimit.advisorySpeedLimitInMetersPerSecond);

    // A weather-dependent speed limit as indicated on the local road signs.
    // The HERE SDK cannot detect the current weather condition, so a driver must decide
    // based on the situation if this speed limit applies.
    Log.d(TAG,"fogSpeedLimitInMetersPerSecond: " + speedLimit.fogSpeedLimitInMetersPerSecond);
    Log.d(TAG,"rainSpeedLimitInMetersPerSecond: " + speedLimit.rainSpeedLimitInMetersPerSecond);
    Log.d(TAG,"snowSpeedLimitInMetersPerSecond: " + speedLimit.snowSpeedLimitInMetersPerSecond);

    // For convenience, this returns the effective (lowest) speed limit between
    // - speedLimitInMetersPerSecond
    // - schoolZoneSpeedLimitInMetersPerSecond
    // - timeDependentSpeedLimitInMetersPerSecond
    return speedLimit.effectiveSpeedLimitInMetersPerSecond();
}

Receive Speed Warning Events

Although you can detect when you exceed speed limits yourself when you receive a new speed limit event (see above), there is a more convenient solution that can help you implement a speed warning feature for your app.

The onSpeedWarningStatusChanged() method will notify as soon as the driver exceeds the current speed limit allowed. It will also notify as soon as the driver is driving slower again after exceeding the speed limit:

// Notifies when the current speed limit is exceeded.
visualNavigator.setSpeedWarningListener(new SpeedWarningListener() {
    @Override
    public void onSpeedWarningStatusChanged(SpeedWarningStatus speedWarningStatus) {
        if (speedWarningStatus == SpeedWarningStatus.SPEED_LIMIT_EXCEEDED) {
            // Driver is faster than current speed limit (plus an optional offset).
            // Play a notification sound to alert the driver.
            // Note that this may not include temporary special speed limits, see SpeedLimitDelegate.
            Uri ringtoneUri = RingtoneManager.getDefaultUri(RingtoneManager.TYPE_NOTIFICATION);
            Ringtone ringtone = RingtoneManager.getRingtone(context, ringtoneUri);
            ringtone.play();
        }

        if (speedWarningStatus == SpeedWarningStatus.SPEED_LIMIT_RESTORED) {
            Log.d(TAG, "Driver is again slower than current speed limit (plus an optional offset).");
        }
    }
});

A SpeedWarningStatus is only delivered once the current speed is exceeded or when it is restored again - for example, when a driver is constantly driving too fast, only one event is fired.

The onSpeedWarningStatusChanged() notification is dependent on the current road's speed limits and the driver's speed. This means that you can get speed warning events also in tracking mode independent of a route. And, consequently, you can receive a SPEED_LIMIT_RESTORED event when the route has changed - after driver's speed slows again.

Optionally, you can define an offset that is added to the speed limit value. You will be notified only when you exceed the speed limit, including the offset. Below, we define two offsets, one for lower and one for higher speed limits. The boundary is defined by highSpeedBoundaryInMetersPerSecond:

private void setupSpeedWarnings() {
    double lowSpeedOffsetInMetersPerSecond = 2;
    double highSpeedOffsetInMetersPerSecond = 4;
    double highSpeedBoundaryInMetersPerSecond = 25;
    SpeedLimitOffset speedLimitOffset = new SpeedLimitOffset(
            lowSpeedOffsetInMetersPerSecond, highSpeedOffsetInMetersPerSecond, highSpeedBoundaryInMetersPerSecond);

    visualNavigator.setSpeedWarningOptions(new SpeedWarningOptions(speedLimitOffset));
}

Here we set the highSpeedBoundaryInMetersPerSecond to 25 m/s: If a speed limit sign is showing a value above 25 m/s, the offset used is highSpeedOffsetInMetersPerSecond. If it is below 25 m/s, the offset used is lowSpeedOffsetInMetersPerSecond.

For the example values used above,

• if the speed limit on the road is 27 m/s, the (high) speed offset used is 4 m/s. This means we will only receive a warning notification when we are driving above 31 m/s = 27 m/s + 4 m/s. The highSpeedOffsetInMetersPerSecond is used, as the current speed limit is greater than highSpeedBoundaryInMetersPerSecond.

• if the speed limit on the road is 20 m/s, the (low) speed offset used is 2 m/s. This means we will only receive a warning notification when we are driving above 22 m/s = 20 m/s + 2 m/s. The lowSpeedOffsetInMetersPerSecond is used, as the current speed limit is smaller than highSpeedBoundaryInMetersPerSecond.

You can also set negative offset values. This may be useful if you want to make sure you never exceed the speed limit by having a buffer before you reach the limit. Note that you will never get notifications when you drive too slow, for example, slower than a defined offset - unless a previous speed warning has been restored.

Get Road Attributes

By implementing the RoadAttributesListener you can receive events on the road attributes. The events are fired whenever an attribute changes - while you are traveling on that road.

// Notifies on the attributes of the current road including usage and physical characteristics.
visualNavigator.setRoadAttributesListener(new RoadAttributesListener() {
    @Override
    public void onRoadAttributesUpdated(@NonNull RoadAttributes roadAttributes) {
        // This is called whenever any road attribute has changed.
        // If all attributes are unchanged, no new event is fired.
        // Note that a road can have more than one attribute at the same time.

        Log.d(TAG, "Received road attributes update.");

        if (roadAttributes.isBridge) {
            // Identifies a structure that allows a road, railway, or walkway to pass over another road, railway,
            // waterway, or valley serving map display and route guidance functionalities.
            Log.d(TAG, "Road attributes: This is a bridge.");
        }
        if (roadAttributes.isControlledAccess) {
            // Controlled access roads are roads with limited entrances and exits that allow uninterrupted
            // high-speed traffic flow.
            Log.d(TAG, "Road attributes: This is a controlled access road.");
        }
        if (roadAttributes.isDirtRoad) {
            // Indicates whether the navigable segment is paved.
            Log.d(TAG, "Road attributes: This is a dirt road.");
        }
        if (roadAttributes.isDividedRoad) {
            // Indicates if there is a physical structure or painted road marking intended to legally prohibit
            // left turns in right-side driving countries, right turns in left-side driving countries,
            // and U-turns at divided intersections or in the middle of divided segments.
            Log.d(TAG, "Road attributes: This is a divided road.");
        }
        if (roadAttributes.isNoThrough) {
            // Identifies a no through road.
            Log.d(TAG, "Road attributes: This is a no through road.");
        }
        if (roadAttributes.isPrivate) {
            // Private identifies roads that are not maintained by an organization responsible for maintenance of
            // public roads.
            Log.d(TAG, "Road attributes: This is a private road.");
        }
        if (roadAttributes.isRamp) {
            // Range is a ramp: connects roads that do not intersect at grade.
            Log.d(TAG, "Road attributes: This is a ramp.");
        }
        if (roadAttributes.isRightDrivingSide) {
            // Indicates if vehicles have to drive on the right-hand side of the road or the left-hand side.
            // For example, in New York it is always true and in London always false as the United Kingdom is
            // a left-hand driving country.
            Log.d(TAG, "Road attributes: isRightDrivingSide = " + roadAttributes.isRightDrivingSide);
        }
        if (roadAttributes.isRoundabout) {
            // Indicates the presence of a roundabout.
            Log.d(TAG, "Road attributes: This is a roundabout.");
        }
        if (roadAttributes.isTollway) {
            // Identifies a road for which a fee must be paid to use the road.
            Log.d(TAG, "Road attributes change: This is a road with toll costs.");
        }
        if (roadAttributes.isTunnel) {
            // Identifies an enclosed (on all sides) passageway through or under an obstruction.
            Log.d(TAG, "Road attributes: This is a tunnel.");
        }
    }
});
}

An implementation example can be found in the Navigation example app you can find on GitHub.

The HERE SDK itself is not reacting on such events as roadAttributes.isTunnel. An application may decide to switch to a night map scheme as long as isTunnel is true. Internally, the HERE SDK is using a tunnel interpolation algorithm to provide this detection as usually the GPS signal is very weak or even lost while being in a tunnel.

Get Lane Assistance

Similar to the other events described above, you can also attach a ManeuverViewLaneAssistanceListener to the navigator. It only sends events when a Route is set. The resulting ManeuverViewLaneAssistance object contains information about the available lanes on the current road and information such as their directions.

Each lane can lead to multiple directions stored in LaneDirectionCategory:

• straight: A lane that goes straight up.
• slightlyLeft: A lane that goes slightly left around 45 degrees.
• slightlyRight: A lane that goes slightly right around 45 degrees.
• quiteLeft: A lane that goes quite left around 90 degrees.
• quiteRight: A lane that goes quite right around 90 degrees.
• hardLeft: A lane that goes hard left around 135 degrees.
• hardRight: A lane that goes hard right around 135 degrees.
• uTurnLeft: A lane that makes a left u-turn around 180 degrees.
• uTurnRight: A lane that makes a right u-turn around 180 degrees.

Note that all members can be true or false at the same time. Theoretically, all members can be true when the lane leads to all multiple directions. Most lanes, however, lead to one or two directions, for example, quiteLeft and quiteRight will be true when the lane splits up into two separate lanes.

To give visual feedback for the driver, it is recommended to create one transparent image asset for each of the nine possible directions. Each image can then be used as an overlay and several images can be blended into one lane pictogram that indicates the possible directions per lane on a road.

Most importantly, while the vehicle is traveling along the route, you can tell the driver which lane to take: This information is stored in the Lane.recommendationState and it is recommended to highlight the pictogram of the recommended lane.

Note that the lane assistance information does not contain the lanes of the contraflow, instead it only describes the lanes of the current driving direction. The list of lanes is always ordered from the leftmost lane (index 0) to the rightmost lane (last index) of the road.

The following code snippet shows how to retrieve the information which lanes to take:

// Notifies which lane(s) lead to the next (next) maneuvers.
visualNavigator.setManeuverViewLaneAssistanceListener(new ManeuverViewLaneAssistanceListener() {
    @Override
    public void onLaneAssistanceUpdated(@NonNull ManeuverViewLaneAssistance maneuverViewLaneAssistance) {
        // This lane list is guaranteed to be non-empty.
        List<Lane> lanes = maneuverViewLaneAssistance.lanesForNextManeuver;
        logLaneRecommendations(lanes);

        List<Lane> nextLanes = maneuverViewLaneAssistance.lanesForNextNextManeuver;
        if (!nextLanes.isEmpty()) {
            Log.d(TAG, "Attention, the next next maneuver is very close.");
            Log.d(TAG, "Please take the following lane(s) after the next maneuver: ");
            logLaneRecommendations(nextLanes);
        }
    }
});

...

private void logLaneRecommendations(List<Lane> lanes) {
    // The lane at index 0 is the leftmost lane adjacent to the middle of the road.
    // The lane at the last index is the rightmost lane.
    // Note: Left-hand countries are not yet supported.
    int laneNumber = 0;
    for (Lane lane : lanes) {
        // This state is only possible if maneuverViewLaneAssistance.lanesForNextNextManeuver is not empty.
        // For example, when two lanes go left, this lanes leads only to the next maneuver,
        // but not to the maneuver after the next maneuver, while the highly recommended lane also leads
        // to this next next maneuver.
        if (lane.recommendationState == LaneRecommendationState.RECOMMENDED) {
            Log.d(TAG,"Lane " + laneNumber + " leads to next maneuver, but not to the next next maneuver.");
        }

        // If laneAssistance.lanesForNextNextManeuver is not empty, this lane leads also to the
        // maneuver after the next maneuver.
        if (lane.recommendationState == LaneRecommendationState.HIGHLY_RECOMMENDED) {
            Log.d(TAG,"Lane " + laneNumber + " leads to next maneuver and eventually to the next next maneuver.");
        }

        if (lane.recommendationState == LaneRecommendationState.NOT_RECOMMENDED) {
            Log.d(TAG,"Do not take lane " + laneNumber + " to follow the route.");
        }

        laneNumber++;
    }
}

Note that each LaneAssistance event is synchronized with some of the vocal commands you can receive via the ManeuverNotificationListener (see below). This means that for most roads, the event arrives simultaneously and at the same frequency as the voice guidance event that describes when to take the next maneuver.

The maneuverViewLaneAssistance.lanesForNextNextManeuver is normally an empty list, but there may be cases when two maneuvers are very close. In such cases, this list holds the information for the lanes to take immediately after the current maneuver is reached.

Until the next maneuver is reached, the information about the lanes to take is valid. It should be hidden once the next maneuver is reached or replaced by the information contained in any new ManeuverViewLaneAssistance event:

// See above code snippet for the RouteProgressListener.
if previousManeuverIndex != nextManeuverIndex {
    // A new maneuver: Remove stale lane assistance info.
}

View the code for the RouteProgressListener above and you can find how to get the nextManeuverIndex, which will tell you when a new maneuver has to be taken.

In addition, the HERE SDK provides JunctionViewLaneAssistance events that notify on the available lanes at complex junctions - even if there is no actual maneuver happening at that junction. These notifications work in parallel to ManeuverViewLaneAssistance, but will only fire when one of the following conditions is met:

• The junction has at least a bifurcation.
• The junction has at least two lanes whose directions do not follow the current route.

Unlike ManeuverViewLaneAssistance, you can detect when the junction has been passed by checking the list if it is empty or not:

// Notfies which lane(s) allow to follow the route.
visualNavigator.setJunctionViewLaneAssistanceListener(new JunctionViewLaneAssistanceListener() {
    @Override
    public void onLaneAssistanceUpdated(@NonNull JunctionViewLaneAssistance junctionViewLaneAssistance) {
        List<Lane> lanes = junctionViewLaneAssistance.lanesForNextJunction;
        if (lanes.isEmpty()) {
            Log.d(TAG, "You have passed the complex junction.");
        } else {
            Log.d(TAG, "Attention, a complex junction is ahead.");
            logLaneRecommendations(lanes);
        }
    }
});

The JunctionViewLaneAssistance may interfere with a ManeuverViewLaneAssistance event, as it only recommends the lanes that allow you to pass the complex junction and to stay on the route. It can happen that this is not containing the same lane recommendations as the lanes from a previous ManeuverViewLaneAssistance event that was sent earlier for a maneuver that takes place after the complex junction has been passed. Therefore, it is recommended to only use JunctionViewLaneAssistance information as an additional hint for a driver while passing a complex junction. After the junction has been passed, make sure to highlight any previous ManeuverViewLaneAssistance information - in case it is still valid and the manuever action has not been taken place (see above). Preferrably, show JunctionViewLaneAssistance information in a separate view to not confuse drivers with quickly changing lane informations.

Either way, the ManeuverViewLaneAssistance event can be equal to the JunctionViewLaneAssistance event or it can contain lane recommendations that are also included in JunctionViewLaneAssistance as JunctionViewLaneAssistance can recommend more lanes to safely pass a complex junction - but not every of those lanes may lead to the next maneuver.

Keep in mind, that without a route to follow, you will not get any lane assistance related events.

Truck Guidance

The HERE SDK supports premium truck routing and guidance with a variety of features. During navigation you can attach a listener to get notified on truck warnings and restrictions ahead, such as narrow tunnels and so on, see the following code snippet:

// Notifies truck drivers on road restrictions ahead. This event notifies on truck restrictions in general,
// so it will also deliver events, when the transport type was to a non-truck transport type.
// The given restrictions are based on the HERE database of the road network ahead.
visualNavigator.setTruckRestrictionsWarningListener(new TruckRestrictionsWarningListener() {
    @Override
    public void onTruckRestrictionsWarningUpdated(@NonNull List<TruckRestrictionWarning> list) {
        // The list is guaranteed to be non-empty.
        for (TruckRestrictionWarning truckRestrictionWarning : list) {
            Log.d(TAG, "TruckRestrictionWarning in: " + truckRestrictionWarning.distanceInMeters + " meters.");
            // One of the following restrictions applies ahead, if more restrictions apply at the same time,
            // they are part of another TruckRestrictionWarning element contained in the list.
            if (truckRestrictionWarning.weightRestriction != null) {
                // For now only one weight type (= truck) is exposed.
                WeightRestrictionType type = truckRestrictionWarning.weightRestriction.type;
                int value = truckRestrictionWarning.weightRestriction.valueInKilograms;
                Log.d(TAG, "TruckRestriction for weight (kg): " + type.name() + ": " + value);
            }
            if (truckRestrictionWarning.dimensionRestriction != null) {
                // Can be either a length, width or height restriction of the truck. For example, a height
                // restriction can apply for a tunnel. Other possible restrictions are delivered in
                // separate TruckRestrictionWarning objects contained in the list, if any.
                DimensionRestrictionType type = truckRestrictionWarning.dimensionRestriction.type;
                int value = truckRestrictionWarning.dimensionRestriction.valueInCentimeters;
                Log.d(TAG, "TruckRestriction for dimension: " + type.name() + ": " + value);
            }
        }
    }
});

You can calculate your route specifically for trucks. See the routing section for more details. In general, if a route contains the truck transportation type, it is optimized for trucks.

In addition, you can specify several avoidance options, for example, to exclude certain city areas. All this can be specified before the route gets calculated and passed into the Navigator or VisualNavigator.

Worth to mention are also the following features:

• You can specify vehicle restrictions such as truck dimensions or if a truck is carrying hazardous goods via TruckOptions that can contain TruckSpecifications and HazardousGood lists.
• You can exclude emission zones to not pollute the air in sensible inner city areas via AvoidanceOptions. With this you can also avoid certain RoadFeatures and tunnel categories. Those can also be set via TruckOptions.
• You can enable a map layer scheme that is optimized to show truck-specific information on the map: MapScene.Layers.VEHICLE_RESTRICTIONS.

Implement a Location Provider

A location provider is necessary to be provide Location instances to the VisualNavigator. It can feed location data from any source. Below we plan to use an implementation that allows to switch between native location data from the device and simulated location data for test drives.

As already mentioned above, the VisualNavigator conforms to the LocationListener interface, so it can be used as listener for classes that call onLocationUpdated().

As source for location data, we will use a HEREPositioningProvider that is based on the code as shown in the Find your Location section.

To deliver events, we need to start the herePositioningProvider:

// Call this to start getting locations from a device's sensor.
herePositioningProvider.startLocating(visualNavigator, LocationAccuracy.NAVIGATION);

The required HERE SDK Location type includes bearing and speed information along with the current geographic coordinates and other information that is consumed by the VisualNavigator. The more accurate and complete the provided data is, the more precise the overall navigation experience will be.

Note that the bearing value taken from the Location object determines the direction of movement which is then indicated by the LocationIndicator asset that rotates into that direction. When the user is not moving, then the last rotation is kept until a new bearing value is set. Depending on the source for the Location data, this value can be more or less accurate.

Internally, the timestamp of a Location is used to evaluate, for example, if the user is driving through a tunnel or if the signal is simply lost.

You can find a reference implementation of the location provider on GitHub.

Set up a Location Simulator

During development, it may be convenient to playback the expected progress on a route for testing purposes. The LocationSimulator provides a continuous location signal that is taken from the original route coordinates.

Below we integrate the LocationSimulator as an alternative provider to allow switching between real location updates and simulated ones.

import com.here.sdk.core.LocationListener;
import com.here.sdk.core.errors.InstantiationErrorException;
import com.here.sdk.navigation.LocationSimulator;
import com.here.sdk.navigation.LocationSimulatorOptions;
import com.here.sdk.routing.Route;

// A class that provides simulated location updates along a given route.
// The frequency of the provided updates can be set via LocationSimulatorOptions.
public class HEREPositioningSimulator {

    private LocationSimulator locationSimulator;

    // Starts route playback.
    public void startLocating(LocationListener locationListener, Route route) {
        if (locationSimulator != null) {
            locationSimulator.stop();
        }

        locationSimulator = createLocationSimulator(locationListener, route);
        locationSimulator.start();
    }

    public void stopLocating() {
        if (locationSimulator != null) {
            locationSimulator.stop();
            locationSimulator = null;
        }
    }

    // Provides fake GPS signals based on the route geometry.
    private LocationSimulator createLocationSimulator(LocationListener locationListener, Route route) {
        double speedFactor = 2;
        int notificationIntervalInMilliseconds = 500;
        LocationSimulatorOptions locationSimulatorOptions =
                new LocationSimulatorOptions(speedFactor, notificationIntervalInMilliseconds);

        LocationSimulator locationSimulator;

        try {
            locationSimulator = new LocationSimulator(route, locationSimulatorOptions);
        } catch (InstantiationErrorException e) {
            throw new RuntimeException("Initialization of LocationSimulator failed: " + e.error.name());
        }

        locationSimulator.setListener(locationListener);

        return locationSimulator;
    }
}

In addition, by setting LocationSimulatorOptions, we can specify, how fast the current simulated location will move. By default, the speed factor is 1.0, which is equal to the average speed a user normally drives or walks along each route segment without taking into account any traffic-related constraints. The default speed may vary based on the road geometry, road condition and other statistical data, but it is never higher than the current speed limit. Values above 1.0 will increase the speed proportionally. If the route contains insufficient coordinates for the specified time interval, additional location events will be interpolated.

The code below shows how you can seamlessly switch between simulated and real locations by calling enableRoutePlayback() and enableDevicePositioning():

// Provides simulated location updates based on the given route.
public void enableRoutePlayback(Route route) {
    herePositioningProvider.stopLocating();
    herePositioningSimulator.startLocating(visualNavigator, route);
}

// Provides location updates based on the device's GPS sensor.
public void enableDevicePositioning() {
    herePositioningSimulator.stopLocating();
    herePositioningProvider.startLocating(visualNavigator, LocationAccuracy.NAVIGATION);
}

Note that we need to ensure to stop any ongoing simulation or real location source before starting a new one.

You can see the code from above included in the Navigation example app on GitHub.

Voice Guidance

While driving, the user's attention should stay focused on the route. You can construct visual representations from the provided maneuver data (see above), but you can also get localized textual representations that are meant to be spoken during turn-by-turn guidance. Since these maneuver notifications are provided as a String, it is possible to use them together with any TTS solution.

Example notifications:

Voice message: After 1 kilometer turn left onto North Blaney Avenue.
Voice message: Now turn left.
Voice message: After 1 kilometer turn right onto Forest Avenue.
Voice message: Now turn right.
Voice message: After 400 meters turn right onto Park Avenue.
Voice message: Now turn right.

To get these notifications, set up a ManeuverNotificationListener:

visualNavigator.setManeuverNotificationListener(new ManeuverNotificationListener() {
    @Override
    public void onManeuverNotification(@NonNull String voiceText) {
        voiceAssistant.speak(voiceText);
    }
});

Here we use a helper class called VoiceAssistant that wraps a Text-To-Speech engine to speak the maneuver notification. The engine uses Android's TextToSpeech class. If you are interested, you can find this class as part of the Navigation example app on GitHub.

You can set a LanguageCode to localize the notification text and a UnitSystem to decide on metric or imperial length units. Make sure to call this before a route is set, otherwise the default settings is (EN_US, METRIC):

private void setupVoiceGuidance() {
    LanguageCode ttsLanguageCode = getLanguageCodeForDevice(VisualNavigator.getAvailableLanguagesForManeuverNotifications());
    visualNavigator.setManeuverNotificationOptions(new ManeuverNotificationOptions(ttsLanguageCode, UnitSystem.METRIC));

    // Set language to our TextToSpeech engine.
    Locale locale = LanguageCodeConverter.getLocale(ttsLanguageCode);
    if (voiceAssistant.setLanguage(locale)) {
        Log.d(TAG, "TextToSpeech engine uses this language: " + locale);
    } else {
        Log.e(TAG, "TextToSpeech engine does not support this language: " + locale);
    }
}

For this example, we take the device's preferred language settings shown below:

private LanguageCode getLanguageCodeForDevice(List<LanguageCode> supportedVoiceSkins) {

    // 1. Determine if preferred device language is supported by our TextToSpeech engine.
    Locale localeForCurrenDevice = Locale.getDefault();
    if (!voiceAssistant.isLanguageAvailable(localeForCurrenDevice)) {
        Log.e(TAG, "TextToSpeech engine does not support: " + localeForCurrenDevice + ", falling back to EN_US.");
        localeForCurrenDevice = new Locale("en", "US");
    }

    // 2. Determine supported voice skins from HERE SDK.
    LanguageCode languageCodeForCurrenDevice = LanguageCodeConverter.getLanguageCode(localeForCurrenDevice);
    if (!supportedVoiceSkins.contains(languageCodeForCurrenDevice)) {
        Log.e(TAG, "No voice skins available for " + languageCodeForCurrenDevice + ", falling back to EN_US.");
        languageCodeForCurrenDevice = LanguageCode.EN_US;
    }

    return languageCodeForCurrenDevice;
}

Note that the HERE SDK supports 37 languages. You can query the languages from the VisualNavigator with VisualNavigator.getAvailableLanguagesForManeuverNotifications(). All languages within the HERE SDK are specified as LanguageCode enum. To convert this to a Locale instance, you can use a LanguageCodeConverter. This is an open source utility class you find as part of the Navigation example app on GitHub.

However, in order to feed the maneuver notification into a TTS engine, you also need to ensure that your preferred language is supported by the TTS engine. Usually each device comes with some preinstalled languages, but not all languages may be present initially.

Supported Languages for Voice Guidance

Below you can find a list of all supported voice languages together with the name of the related voice skin that is stored inside the HERE SDK framework:

• Arabic (Saudi Arabia): ar-SA_tarik_compact
• Czech: cs-CZ_iveta_compact
• Danish: da-DK_magnus_compact
• German: de-DE_anna_compact
• Greek: el-GR_nikos_compact
• English (British): en-GB_serena_compact
• English (United States): en-US_tom_compact
• Spanish (Spain): es-ES_jorge_compact
• Spanish (Mexico): es-MX_angelica_compact
• Farsi (Iran): fa-IR_anonymous_compact
• Finnish: fi-FI_onni_compact
• French (Canada): fr-CA_chantal_compact
• French: fr-FR_audrey_compact
• Hebrew: he-IL_carmit_compact
• Hindi: hi-IN_lekha_compact
• Croatian: hr-HR_anonymous_compact
• Hungarian: hu-HU_mariska_compact
• Indonesian: (Bahasa) id-ID_damayanti_compact
• Italian: it-IT_alice_compact
• Japanese: ja-JP_sakura_compact
• Korean: ko-KR_sora_compact
• Norwegian: (Bokmål) nb-NO_henrik_compact
• Dutch: nl-NL_claire_compact
• Portuguese (Brazil): pt-BR_luciana_compact
• Polish: pt-PT_joana_compact
• Romanian: ro-RO_ioana_compact
• Russian: ru-RU_katya_compact
• Slovak: sk-SK_laura_compact
• Serbian: sr-CS_anonymous_compact
• Swedish: sv-SE_alva_compact
• Thai: th-TH_kanya_compact
• Turkish: tr-TR_cem_compact
• Ukrainian: uk-UA_anonymous_compact
• Vietnamese: vi-VN_anonymous_compact
• Chinese (Simplified China): zh-CN_tian-tian_compact
• Chinese (Traditional Hong Kong): zh-HK_sin-ji_compact
• Chinese (Traditional Taiwan): zh-TW_mei-jia_compact

Unzip the HERE SDK framework and search for the voice_assets folder. If you want to shrink the size of the framework, you can remove the voice packages you do not need.

Stop Navigation

While turn-by-turn navigation automatically starts when a route is set and the LocationPrivider is started, stopping navigation depends on the possible scenario:

Either, you want to stop navigation and switch to tracking mode (see below) to receive map-matched locations while still following a path - or you want to stop navigation without going back to tracking mode. For the first case, you only need to set the current route to null. This will only stop propagating all turn-by-turn navigation related events, but keep the ones alive to receive map-matched location updates and, for example, speed warning information. Note that propagation of turn-by-turn navigation events is automatically stopped when reaching the desired destination. Once you set a route again, all turn-by-turn navigation related events will be propagated again.

If you want to stop navigation without going back to tracking mode - for example, to get only un-map-matched location updates directly from a location provider - it is good practice to stop getting all events from the VisualNavigator. For this you should set all listeners individually to null.

You can reuse your location provider implementation to consume location updates in your app. With HERE positioning you can set multiple LocationListener instances.

When you use the VisualNavigator, call stopRendering(). Once called, the MapView will be no longer under control by the VisualNavigator:

• Settings, like map orientation, camera distance or tilt, which may have been altered during rendering are no longer updated. They will keep the last state before stopRendering() was called. For example, if the map was tilted during guidance, it will stay tilted. Thus, it is recommended to apply the desired camera settings after stopRendering() is called.
• The map will no longer move to the current location - even if you continue to feed new locations into the VisualNavigator.
• The default or custom location indicator owned by the VisualNavigator will be hidden again.
• Note that all location-based events such as the RouteProgress will be still delivered unless you unsubscribe by setting a null listener - see above.

Tracking

While you can use the VisualNavigator class to start and stop turn-by-turn navigation, it is also possible to switch to a tracking mode that does not require a route to follow. This mode is also often referred to as the driver's assistance mode. It is available for car and truck transport modes.

To enable tracking, you only need to call:

visualNavigator.setRoute(null);
herePositioningProvider.startLocating(visualNavigator, LocationAccuracy.NAVIGATION)

Here we enable getting real GPS locations, but you could also play back locations from any route using the LocationSimulator (as shown above).

Of course, it is possible to initialize the VisualNavigator without setting a route instance - if you are only interested in tracking mode you don't need to set the route explicitly to null. Note that in tracking mode you only get events for the NavigableLocationListener and the SpeedWarningListener. All other listeners may simply not deliver events when a route is not set (consult the API Reference for an overview to see which listeners work in tracking mode). This enables you to keep your listeners attached and to switch between free tracking and turn-by-turn-navigation on the fly.

Tracking can be useful, when drivers already know the directions to take, but would like to get additional information such as the current street name or any speed limits along the trip.