The HERE SDK provides a number of ways to change the view on a map. While you can use map styles to change the look of the map, you can use a camera to view the map from different perspectives.
For example, the HERE SDK allows you to set a target location, tilt the camera, zoom in and out, or set a bearing angle.
At a glance
HereMapController.camerato manipulate the view of the map.
camera.lookAtPoint(GeoCoordinates(52.520798, 13.409408)). This instantly switches the map view to the new location.
_hereMapController.camera.lookAtPointWithDistance( GeoCoordinates(52.520798, 13.409408), distanceToEarthInMeters). Get the current distance from the camera's
GeoOrientationUpdateto specify the tilt angle and bearing angle of the camera.
MapCamera.principalPointto change the default pivot point that is centered on the map view.
By default, the camera is located centered above the map. From a bird's eye view looking straight-down, the map is oriented North-up. This means that on your device, the top edge is pointing to the north of the map.
If you want to move the map to a new location with an animation, use the
flyTo() method. If you want to instantly switch to a new map location, you can do so by setting a new target:
By setting a new camera target, you can change the camera's location and effectively change the location that is shown at the center of the map view. The
lookAt() method is available in different overloads. Just a few examples:
// Change only the location. _hereMapController.camera.lookAtPoint(GeoCoordinates(52.520798, 13.409408)); // Change zoom and location. _hereMapController.camera.lookAtPointWithDistance(GeoCoordinates(52.530932, 13.384915), 1000 * 2.0); // Change location area and orientation. var southWestCorner = GeoCoordinates(52.373556, 13.114358); var northEastCorner = GeoCoordinates(52.611022, 13.479493); var geoBox = GeoBox(southWestCorner, northEastCorner); var orientation = GeoOrientationUpdate(); orientation.tilt = 45.0; _hereMapController.camera.lookAtAreaWithGeoOrientation(geoBox, orientation);
Note that changing the orientation (bearing, tilt) of the camera does not change the location of the map.
The HERE SDK also supports dedicated zoom levels in the range [0,22] to provide a quick way to achieve the desired level of detail. Call the camera's
zoomTo(zoomLevel) method to set the zoom level and access the current zoom level from the camera's
State property. Important: The zoom level is set as
Double, be sure to not mix it with the
distanceInMeters parameter that is also of type
By changing the camera, you can only programmatically change the perspective of the map view, but you do not have direct control of the map view itself - like when performing gestures to zoom the map or to rotate or to tilt the map. See the Gestures section for an overview of the available gestures to manipulate the map directly.
MapCamera is always in a defined
State. For example, the
State is providing the current target location. This target location indicates the current center of the map view - unless the default principal point was changed (see below).
With the camera, you cannot rotate the map directly, but change the camera's orientation instead. By changing the
bearing parameter of the
GeoOrientationUpdate, you will have the same effect as when rotating the map.
The orientation of the map is usually specified by a bearing angle. 'Bearing' is a navigational term, counted in degrees, from the North in a clockwise direction.
By default, the camera has a bearing value of 0° degrees. By setting a bearing angle of 45°, as visualized in the illustration above, the map appears to the camera's eye as it rotates counter-clockwise and the direction of the bearing becomes the new upward direction on your map, pointing to the top edge of your device. This is similar to holding and rotating a paper map while hiking in a certain direction. Apparently, it is easier to orient yourself if the map's top edge points in the direction in which you want to go. However, this will not always be the true North direction (bearing = 0°).
Note that the bearing axis is always perpendicular to the ground and passes through the camera, regardless of the current camera orientation.
The following code rotates the camera by 90°:
var bearingInDegrees = 90.0; var tiltInDegrees = 0.0; var orientation = GeoOrientationUpdate(bearingInDegrees, tiltInDegrees); var target = GeoCoordinates(52.373556, 13.114358); var distanceInMeters = 1000 * 7.0; _hereMapController.camera.lookAtPointWithGeoOrientationAndDistance(target, orientation, distanceInMeters);
Effectively, for the viewer this lets the map appear rotated by 90° to the left.
Alternatively, you can use the nullable constructor fields and set only the tilt value for the orientation like so:
var bearing = 90.0; var defaultOrientation = GeoOrientationUpdate(bearing, null);
Then the current tilt orientation of the map will be unchanged and only the bearing can be changed.
The camera can also be used to transform the flat 2D map surface to a 3D perspective to see, for example, roads at a greater distance that may appear towards the horizon. By default, the camera is not tilted (tilt = 0°).
In addition to the tilt value of the camera, the camera's bearing angle (see above) can be manipulated. Here we show the effect of changing the tilt value. Look at the illustration below to see the available camera axes.
A tilt value of 0° means that the camera's optical axis is perpendicular to the ground. The tilt angle is always calculated from this perpendicular axis. The tilt angle relates to the optical axis of the camera.
As visualized in the illustration, tilting the camera by 45° will change the bird's eye view of the camera to a 3D perspective. Use the code below to change only the tilt value of the camera:
var bearingInDegrees = 0.0; var tiltInDegrees = 45.0; var orientation = GeoOrientationUpdate(bearingInDegrees, tiltInDegrees); var target = GeoCoordinates(52.373556, 13.114358); var distanceInMeters = 1000 * 7.0; _hereMapController.camera.lookAtPointWithGeoOrientationAndDistance(target, orientation, distanceInMeters);
Alternatively, you can use the nullable constructor fields and set only the tilt value for the orientation like so (this will keep the default bearing value of the map):
var tilt = 45.0; var newOrientation = GeoOrientationUpdate(null, tilt);
Any subsequent tilt value will always be applied from the camera's default location. This is the same for the tilt angle and the bearing angle of the camera. Some values will be clamped when they are out of range.
All axes can be manipulated at the same time. Changing the bearing value will give different results when the camera is tilted.
By default, the map's pivot point - or principal point - is centered on the map view. It determines the point where the target coordinates are placed within the map view. Setting a new principal point instantly moves the map to render the current target coordinates at the new principal point. It is set in pixels relative to the map view's origin top-left (0, 0).
The principal point affects all programmatical map transformations (rotate, orbit, tilt and zoom) and the two-finger-pan gesture to tilt the map. Other gestures, like pinch-rotate, are not affected.
Usually, you want to set the principal point only once, for example to lower the transform center a bit during turn-by-turn navigation - so the user can see more of the road ahead. To achieve this, you need to get the pixel dimensions of your map view (based on your layout and the device's screen dimensions) and then lower the height by 3/4, that is multiply
mapViewHeightInPixels by 0.75. See the following example:
// Repositions principal point 3/4 lower than default. var mapViewWidthInPixels = _hereMapController.viewportSize.width; var mapViewHeightInPixels = _hereMapController.viewportSize.height; Point2D newTransformCenter = Point2D(mapViewWidthInPixels / 2, mapViewHeightInPixels * 0.75); _hereMapController.camera.principalPoint = newTransformCenter;
The code snippet above sets a new principal point that will instantly move the current map center down by 3/4 of the visible map area on screen. Once set, all further map manipulations will be pivoted around this new principal point. For example, when you programmatically rotate the map, the map will always rotate around the principal point.
More example code for this can be seen in the camera_app example on GitHub.