HERE Android SDK Developer's Guide

Car and Pedestrian Routing

Note: As of HERE SDK v3.2, RouteManager has been deprecated. Car and pedestrian routing are now handled by the CoreRouter class.

The HERE Android SDK supports route calculation with multiple waypoints, optimized for walking or driving. A route describes a path between at least two waypoints, the starting point and the destination, with optional intermediate waypoints in between. Applications can provide route information to users in two ways:

  • A line rendered on a map that displays a connecting path between all waypoints
  • Turn-by-turn directions in text format

Route Calculation Classes

This section introduces the following classes that are used for route calculations:
  • CoreRouter
  • RoutePlan
  • RouteWaypoint
  • RouteOptions

The CoreRouter class is responsible for calculating car, pedestrian, and truck routes. An application can initiate a route calculation by calling the CoreRouter.calculateRoute(RoutePlan, CoreRouter.Listener) method, providing options and waypoints through RoutePlan, and receive progress events through the Router.Listener instance.

Note: The CoreRouter can also calculate routes with traffic taken into account by using Route.TrafficPenaltyMode and setDynamicPenalty(DynamicPenalty) before calling calculateRoute(). For more information on the DynamicPenalty class, see Dynamic Routing Penalty.

RoutePlan is a waypoint container that is used for route calculation. A RoutePlan object is comprised of a list of waypoint objects and an optional RouteOptions. If RouteOptions is not specified, default values are used.

You can use RouteWaypoint to add more waypoint details to a route calculation. These details include whether a waypoint is a deliberate stopover or a via point that the route must pass through. This affects routing, as routes containing stopovers or via waypoints may be different. For example, a calculated route may suggest a U-turn maneuver after a stopover, while a route containing the same location as a via waypoint suggests continuing on the same street. The via waypoint type is only supported in car routes, and it is not supported in other route types.

The RouteOptions class is a model of the parameters required to calculate one route. It encapsulates "building block" parameters for a route such as:

  • The desired number of routes
  • The direction of travel that the route should start in
  • The routing type, such as fastest travel time or shortest distance
  • The departure time
  • The allowed types of route segments, such as dirt roads or highways

The HERE SDK supports alternate routes between two waypoints. The alternate route feature allows more than one route to be returned after a route calculation. You can use the RouteOptions class to set the desired number of routes, and the HERE SDK then returns different routes according to this limit. Note that the first element of the returned list of RouteResult is the main route, and the rest of the returned routes are not listed in any specific order.

Note: Voice navigation with routes that contain via waypoints is only supported through pre-recorded voices. For more information about voice navigation, see Voice Instructions.
Note: Do not set more than three desired routes in offline mode, as these route calculations take significantly more time to complete.

RouteResult and Route

The RouteResult class represents a route calculation result. Applications can retrieve a Route object and the corresponding set of violated routing conditions. Violated routing options are the conditions that a routing result was unable to adhere to. For example, after specifying a route calculation that avoids tolls and ferries, you may get a RouteResult that contains a Route object along with RouteResult.ViolatedOption.AVOID_TOLL_ROADS. This indicates that although a route was found, this route goes through at least one toll road—violating a condition of your route request.

The Route class is a distinct calculated path connecting two or more waypoints, consisting of a list of maneuvers and route links. By using CoreRouter.calculateRoute(RoutePlan, CoreRouter.Listener) to trigger a route calculation, your application can use the CoreRouter.Listener to monitor the calculation and trigger callback methods. These callback methods have parameters that include a list of the calculated RouteResult objects. Using these RouteResult objects, you can call getRoute() to retrieve the routes.

The MapRoute map object

The MapRoute class is a type of MapObject that displays a calculated route on a map. Typically, an application creates a MapRoute after a route calculation, passing the relevant Route object as a parameter to the MapRoute(Route) constructor before adding the MapRoute to the map by calling Map.addMapObject(MapRoute).

Note: MapRoute.setRenderType(RenderType) must be called after the MapRoute is added to a Map.

For example, if you want to render a route that connects two waypoints (start and destination), you can add the following application logic:

Figure 1. Calculate Route
  1. Declare a CoreRouter instance.
    // Declare the variable (the CoreRouter)
    CoreRouter router = new CoreRouter();
  2. Create a RoutePlan and add two GeoCoordinate waypoints.
    // Create the RoutePlan and add two waypoints
    RoutePlan routePlan = new RoutePlan();
    routePlan.addWaypoint(new RouteWaypoint(new GeoCoordinate(49.1966286, -123.0053635)));
    routePlan.addWaypoint(new RouteWaypoint(new GeoCoordinate(49.1947289, -123.1762924)));
  3. Create a new RouteOptions object, set its Type and TransportMode values by calling appropriate RouteOptions methods, and then add it to RoutePlan.
    // Create the RouteOptions and set its transport mode & routing type
    RouteOptions routeOptions = new RouteOptions();
  4. To make sure route calculation can handle returning a Route object that in turn can be used to create a MapRoute instance for rendering on the map, add an inner class by implementing CoreRouter.Listener in the appropriate activity class.
    private class RouteListener implements CoreRouter.Listener {
      // Method defined in Listener
      public void onProgress(int percentage) {
        // Display a message indicating calculation progress
      // Method defined in Listener
      public void onCalculateRouteFinished(List<RouteResult> routeResult, RoutingError error) {
        // If the route was calculated successfully
        if (error == RoutingError.NONE) {
          // Render the route on the map
          mapRoute = new MapRoute(routeResult.get(0).getRoute());
        else {
          // Display a message indicating route calculation failure
  5. After adding the inner listener class (named RouteListener for this example), calculate the route by calling CoreRouter.calculateRoute(RoutePlan, CoreRouter.Listener). Note that CoreRouter.Listener extends Router.Listener<List<RouteResult>, RoutingError>.
    // Calculate the route
    router.calculateRoute(routePlan, new RouteListener());

Dynamic Routing Penalty

You can use DynamicPenalty to create a policy of roads and area restriction factors that are applied during routing calculations. For example, you can use this class to indicate that the travel speed in an area is 50 percent slower than usual. The DynamicPenalty class also allows you to set the mode used for handling traffic events in a route calculation through the setTrafficPenaltyMode(TrafficPenaltyMode) method.

You can change the active policy by calling CoreRouter.setDynamicPenalty(DynamicPenalty). The policy must be set before a route calculation for the restrictions to be taken into account.

Retrieving Traffic Event Objects

You can use the TrafficUpdater class to retrieve traffic events such as road closures or congestions. Before using the traffic updater, it must be be enabled via TrafficUpdater.enableUpdate(boolean update) for the traffic requests to take effect.

Using the TrafficUpdater is a two-step process. First, create a TrafficUpdater.Listener and use it with one of the following methods:
  • request(GeoCoordinate center, Listener listener) - request traffic with given center coordinates and the default radius
  • request(GeoCoordinate center, int radius, Listener listener) - request traffic with given center coordinates and radius
  • request(Route route, Listener listener) - request traffic for the given route and default radius around each waypoint
  • request(Route route, int radius, Listener listener) - request traffic for given route and radius around each waypoint
  • request(RouteElements elements, Listener listener) - request traffic for a route element (RouteElement) object
Upon the successful callback from TrafficUpdater.Listener (with the state TrafficUpdater.RequestState.DONE), you should retrieve a list of traffic events that affect the given route or route element by using one of the following methods:
  • getEvents(Route route, GetEventsListener listener)
  • getEvents(RouteElement element, GetEventsListener listener)
  • getEvents(List<RouteElement> elements, GetEventsListener listener)
  • getEvents(RouteElements elements, GetEventsListener listener)

TrafficUpdater.GetEventsListener contains one callback method, onComplete(List<TrafficEvent> events, Error error), which provides a newly updated list of traffic events.

Routing-related Enumerations

Route calculations make use of HERE SDK enumerations that include:

  • The Route.TrafficPenaltyMode enum - represents values describing how the CoreRouter should handle traffic events in a route calculation, such as DISABLED, AVOID_LONG_TERM_CLOSURES, or OPTIMAL.
  • The RouteOptions.Type enum - represents values describing different routing types, such as FASTEST or SHORTEST
  • The RouteOptions.TransportMode enum - represents values describing different transport modes, such as CAR TRUCK, TRACK (which connects waypoints using straight lines), or PEDESTRIAN
  • The RoutingError enum - represents values describing possible route calculation errors, such as NONE or VIOLATES_OPTIONS
  • The RouteResult.ViolatedOption enum - represents values describing possible route option violations, such as AVOID_HIGHWAYS or AVOID_FERRIES

You cannot use this account to purchase a commercial plan on Developer Portal, as it is already associated to plans with different payment methods.

To purchase a commercial plan on Developer Portal, please register for or sign in with a different HERE Account.

Something took longer than expected.

The project should be available soon under your projects page.

Sorry, our services are not available in this region.

Something seems to have gone wrong. Please try again later.

We've detected that your account is set to Australian Dollars (AUD).
Unfortunately, we do not offer checkouts in AUD anymore.
You can continue using your current plan as normal, but to subscribe to one of our new plans,
please register for a new HERE account or contact us for billing questions on